AAC Horizontal Wall Panels
Point 1
Supporting columns must be plumb, level and within linear building line tolerances.
Point 2
Protect the panels from rain water saturation by leaving them on pallets and away from standing water.
Point 3
Set panels with tongue side up and follow specifications and shop drawings for placement of adhesive and joint filler.
Point 4
Panel(s) must lay flush against face of column or steel shim plates.
Point 5
In the event bowing occurs with the AAC panels within a column bay,
stack the AAC panels so that the bow is constant in one direction.
Failure To Adhere To
These Proper Installation
Procedures Will Render
Warranty Null And Void
SafeCrete
Installation Manual
End Page 8