AAC Precast Block Walls
Points To Check

Point 1
Do not rout horizontally less than 24" from the
top of load bearing walls unless otherwise restricted by drawings of specifications.

Point 2
Do not rout horizontally greater than
1/3 of the total wall thickness unless otherwise restricted by drawings of specifications.
A + B < 1/3 of total thickness unless otherwise restricted by drawings of specifications.

Point 3
Do not rout back-to-back wall channels.
Offset channels at least 12".

FAILURE TO ADHERE TO THESE PROPER INSTALLATION PROCEDURES WILL RENDER WARRANTY NULL
AND VOID.

Back to Table of Contents

Previous

SafeCrete
Installation Manual

End Page 4