AAC Masonry Products
Material Handling Procedures


Please read the following instructions to insure proper handling and installation of Autoclaved Aerated Concrete (AAC). Damage may occur if AAC is moved or handled several times. If damage should occur, damaged block should be trimmed and installed to reduce job site waste.

For All AAC
Construction Products

 Deliver only an amount of material that can readily be installed.

 Unload pallets using pallet forks (either forklift or pallet fork on a crane cable). Consult your OSHA safety manual for "Rigging" for other safety considerations.
It is not advisable to use crane straps and slings.
 

 Storage areas should be accessible to delivery trucks and convenient to material staging areas. If possible, drop-deliver the material right to the material staging areas.

 Storage material should always be stored away from other construction activities on a flat-grade area that is not susceptible to standing water, erosion or settling.

 Keep the material covered and banded until ready
for installation.

Back to Table of Contents

Next

 

SafeCrete
Installation Manual

End Page 1